Safety Instructions - Numark CDN-32SE Operating Manual

CDN-32SE
Safety Information and Product Registration
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE ANY COVER. NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL ONLY.
The lightning flash with arrowhead symbol within the
equilateral triangle is intended to alert the user to the
presence of un-insulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
The exclamation point within the equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying this appliance.
FOR USA & CANADIAN MODELS ONLY
TO PREVENT ELECTRIC SHOCK DO NOT USE
THIS (POLARIZED) PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET
UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.

SAFETY INSTRUCTIONS

1) Read Instructions - All the safety and operating instructions
should be read before this product is connected and used.
2) Retain Instructions - The safety and operating instructions
should be kept for future reference.
3) Heed Warnings - All warnings on this product and in these
operating instructions should be followed.
4) Follow Instructions - All operating and other instructions should
be followed.
5) Water and Moisture - This product should be kept away from
direct contact
with liquids.
6) Heat - Avoid
placing this
product to close to any high heat sources such as radiators.
7) Ventilation - The appliance should be situated so that it's
location or position does not interfere with it's proper ventilation.
For example, the appliance should not be situated on a bed,
©2001 Numark Industries
CAUTION
CAUTION
sofa, rug, or similar surface
that may block the
ventilation opening; or,
placed in a built-installation,
such as bookcase or cabinet
that may impede the flow of
air through the ventilation
openings.
8) Power Sources - This product should be connected to a power
supply only of the type described in these operating instructions,
or as marked on the unit.
9) Power Cord Protection - Power supply cords should be routed
so that they are not likely to be walked upon or pinched by items
placed on or against them. When removing the cord from a
power outlet be sure to remove it by holding the plug attachment
and not by pulling on the cord.
10) Object and Liquid Entry
- Take care that
objects do not fall into
and that liquids are not
spilled into the inside of the mixer.
11) Cleaning – The appliance should be cleaned only as
recommended by the manufacturer.
12) Non-use Periods – The power cord of the appliance should be
unplugged from the outlet when left unused for long periods of
time.
13) Damage Requiring Service - Only qualified personnel should
service this product. If you have any questions about service
please contact Numark at
the number(s) shown on the
back cover of this manual.
14) Grounding or Polarization - Precautions should be taken so that
the grounding or polarization means built into the CD player is
not defeated.
15) Internal/External Voltage Selectors - Internal or external voltage
selector switches, if any, should only be reset and re-equipped
with a proper plug for alternative voltage by a qualified service
technician. Do not attempt to alter this yourself.
16) Carts and Stands －The appliance should be used only with a
cart or stand that is recommended by the manufacturer of the
cart or stand.
moved with care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart combination to
overturn.
- The Leader in DJ Technology
- 2 -
An appliance and cart combination should be
http://www.numark.com