Table of Contents
Advertisement
Checking the base station's MAC address
(only on a Gigaset base)
Depending on the network configuration, you may require the MAC address of the base station,
e.g. in order to enter it in the router's access control list.
Check the MAC address on the handset:
MAC address is displayed
Return to idle status:
Changing the system PIN
(depending on the base)
Secure the telephone's system settings with a system PIN. You have to enter the system PIN
when you register or de-register a handset, change local network settings, perform a firmware
update or reset the phone to default settings.
Change the telephone's 4-digit system PIN (default setting: 0000):
¤
. . . use
OK
. . . use
new system PIN
Resetting system PIN
(only on a Gigaset base)
Resetting the base station to the original PIN 0000:
¤
Unplug the network cable from the base station
key on the base station
station
Press and hold the key for at least 5 secs . . . the base station is reset and the system
PIN is set to 0000
All handsets are de-registered and must be re-registered. All settings are returned to
default settings.
Restoring the phone to default settings
When the settings are reset
•
the date and time are retained,
•
handsets are still registered,
•
the system PIN is retained,
•
Maximum Range is activated and No Radiation is deactivated.
¤
. . . use
OK
. . . use
takes around 10 seconds.
Back
to select
Settings
to enter the current PIN (if other than 0000)
Save
At the same time reconnect the network cable to the base
to select
Settings
to enter system PIN
Availability and operation of the functions
may differ on your telephone.
OK
System
Press and hold the Registration/Paging
OK
System
OK
Yes . . . the base station is restarted. The restart
OK
System PIN
OK
. . . use
to enter
OK
Base Reset
System
. . . the
45
Advertisement
Table of Contents
