2.
The following Logic Board and Strobe Board connectors were modified
because they were obstructed by the repositioned Optical Assembly/Data
Card Holder:
Logic Board (Refer to Figure 3)
• DC to DC Converter Board Harness connector (P1).
• Subject and Data Shutter Solenoid Harness connector (P5).
Subject Strobe Board (Refer to Figure 4)
• Capacitor Board Harness connector (P1)
• Logic/Subject/Data Harness connector (P2)
Vertical Card Guide
(PN 70154V)
New Molded
Front Shroud
(PN 70100V)
Figure 2
3
ID-100 Manual Addendum