Remote Control; Using Accessories; Clip Holder For Camera; Waterproof Housing - Abus TVVR11000 User Manual

6. Remote control

To train a remote control for a camcorder, follow the following steps:
1. Switch off the TVVR11000 camcorder and hold down the OK button *6. Switch on the device by
holding down the button. Once the device has started, release the OK button.
2. On the remote control, press the Start recording and Stop recording buttons at the same time for 4
seconds to finish the training.
Note:
• The distance between the remote control and camcorder can be approx. 5 metres depending on the
surroundings.

7. Using accessories

The camcorder can be attached to a person or an object using various clips or holders.

7.1 Clip holder for camera

TVVR11000

7.2 Waterproof housing

TVVR11000
Start recording
Photo trigger
Stop recording
Clip
Waterproof housing
Ready-to-go clip
9
English
Ready-to-go