TVVR11000 User Manual Version 12/2011 Original English user manual. Keep for future use.
Page 2
The ABUS Security-Center GmbH assumes no liability for technical and typographical faults and reserves the right to make at any time modifications to the product or user manual without a previous announcement.
Page 3
The warranty will expire for damage due to non-compliance with these operating instructions. ABUS will not be liable for any consequential loss! ABUS will not accept liability for damage to property or personal injury caused by incorrect handling or non-compliance with the safety-instructions.
Page 4
English Warnings Follow all safety and operating advises before starting-up the device! 1. Follow these directions in order to avoid damage of the power cord or plug: Do not modify or process the power cord or plug arbitrarily. Do not bend or twist the power cord. Make sure to disconnect the power cord holding the plug.
English Table of contents Intended use ............................6 Scope of delivery ............................ 6 Features and functions .......................... 6 Charging the battery ..........................7 Product overview............................ 7 5.1 LED evaluation ..........................8 5.2 Manual video recording ........................8 5.3 Recording with noise detection ...................... 8 5.4 Audio recording ..........................
English 1. Intended use Thanks to its 3 hour battery operation, the ABUS camcorder can be used for mobile surveillance as well as for recording sport and leisure activities. Moreover, the camcorder can also be used in water with the waterproof housing supplied.
English 4. Charging the battery To charge the built-in battery, connect the camcorder to a PC or notebook with the USB cable supplied. You can also use other standard 5 V DC USB charging devices. When the battery is completely discharged, the charging time will take approx.
English Note: Throughout the manual, the buttons are given a number* (such as *4, *5, *14) which serve to assist you and refer to the key (5. Product overview). 5.1 LED evaluation The different colours of the LED*1*2 have the following meanings: LED colour Status Description...
To train a remote control for a camcorder, follow the following steps: 1. Switch off the TVVR11000 camcorder and hold down the OK button *6. Switch on the device by holding down the button. Once the device has started, release the OK button.
English 7.3 Clip used with the waterproof housing Tipp: The clip can be rotated for mounting. You need to do this to get at the screws. 8. OSD menu settings 8.1 Inserting the micro SD card and switching on the camcorder Insert your micro SD card in slot *15 intended for this purpose.
English You can change the following menu items here: Menu item Explanation Beep Button sound on or off. Time Display Select whether the time/date appears in the recordings. Ring buffer on or off (i.e. when the SD card is full, the device overwrites the oldest Loop Record data).
English 9. Transferring data to media To do this, connect the product to your notebook or computer using the USB cable supplied. Then switch on the device with switch *20. After a few seconds, your computer/laptop detects the camcorder and declares it as its own drive. SD card (2GB in example ) Internal camcorder-memory Films and photos are located in this example at MEDIA (E:)/DCIM/100MEDIA.
Operating temperature -10°c to 60°c Humidity 15% to 85% Dimensions (W x H x D) 85 x 50 x 23 mm Weight TVVR11000 remote control Wireless frequency 433 MHz Protection class IP 64 Operating temperature -10°C to 60°C 15% to 80%...
Need help?
Do you have a question about the TVVR11000 and is the answer not in the manual?
Questions and answers