Janome HT2008 Instruction Manual page 68

Janome HT2008 Instruction Manual
Appliqué
Machine setting
q Pattern
w LED display
e Foot
Baste or glue applique pieces on the fabric.
Stitch around the applique making sure the needle
falls along the outer edge of the applique.
When turning corners, lower the needle down into the
outer edge of the appliqué, and raise the presser foot
to pivot the fabric.
Scallop Stitch
Machine setting
q Pattern
w LED display
e Foot
Sew on the right side of fabric along the edge leaving
a 1 cm (3/8") allowance.
After sewing, trim the allowance close to the stitching
taking care not to cut the thread.
Patchwork
Machine setting
q Pattern
w LED display
e Foot
Seam two layers of the fabric with right side together.
Open the fabric flat and sew the pattern over the
seam line on the right side of the fabric.
www.toews.com
F: Satin stitch foot
A: Zigzag foot
F: Satin stitch foot
q
q
q
68
Janome 2008 Sewing Machine
w e
w e
w e
HT2008 Owners Manual/ User Guide