Connecting the Connection Cord
The indoor unit is powered from the outdoor unit via the connection cord.
Remove the screw on the electrical component box.
1
2
Push the hook of the electrical component box and pull the electrical
component box out forward.
3
Route the connection cord through the side of the indoor unit and connect
the cable to terminals; refer to the figure below.
4
Route the other end of the cable to the outdoor unit through the
ceiling & the hole on the wall.
Reassemble the electrical component box carefully tightening the screw.
5
Wiring Diagram
Indoor Unit
Outdoor Unit
Communication
Power
Next Indoor unit
(Communication)
Next Indoor
unit(Power)
15
E-