Tips And Hints; Maintenance - C.E.C. TLO 3.0 Owner's Manual

Tips and Hints

❶  D o not touch the CD Stabilizer and the disc until the CD-Turntable has stopped spinning
completely. Pressing the CD Stabilizer down exessively while it is still spinning may cause
stress on the spinning mechanism and lead to malfunction.
❷  T he supplied CD Stabilizer is very heavy and should be handled with care. Dropping it
on the floor etc. by accident may cause deformation resulting in reading errors. The CD
Stabilizer is a fragile and expensive part, and should be handled with care.
❸  B elt replacement and Spindle overhaul
TL0 3.0 is equipped with a belt drive mechanism. The rubber belt will gradually deteriorate
over time. Possible symptoms resulting from this are; failure to read TOC, sound skipping,
etc. You will need to have the belt replaced in such cases. We recommend replacing the belt
at least once every 5 years.
Likewise, the spindle will also gradually deteriorate over time. We recommend an overhaul
at least once every 8 years. Please contact your dealer or an authorized CEC service
center.

Maintenance

❶ If the surface of the TL0 3.0 case becomes soiled, wipe with a soft cloth or use diluted
neutral cleaning liquid. Be sure to remove any fluid completely. Do not use thinner, benzene,
alcohol, chemical cloths or bleaching agents as these may damage the surface of the TL0 3.0
case. Also avoid using aerosol insecticides near this appliance.
❷ If dust accumulates on the CD-Turntable, remove it with stick tape (e.g. Scotch tape). Make
sure not to touch the optical pickup lens with your fingers.
❸  T L0 3.0 requires no periodic maintenance except the belt and spindle replacement
mentioned above, and contains no user-serviceable parts. Contact your dealer or an
authorized CEC service center for an inspection and repair in case of malfunction.
TL0 3.0 User's Manual
1