Playback - C.E.C. TLO 3.0 Owner's Manual

CD TRANSPORT TL0 3.0

Playback

Normal Playback
❶ Press the POWER button to turn the power on.
❷ Lift up the CD Stabilizer holding the
top edge securely. Place a disc on
the CD-Turntable and place the CD
Stabilizer gently on top of the disc.
Remove your hand from the CD
Stabilizer before the CD-Turntable
will start automatically in 1 second.
■Only use the supplied CD
Stabilizer. Any other type of
the CD Stabilizer may cause a
malfunction.
❸ The disc and the CD Stabilizer placed
on the CD-Turntable are detected by
the sensors, then the CD-Turntable
will start rotating in 1 second auto-
matically to read out the disc information. Approximately 5 seconds later the display
will change to indicate the total number tracks and the total playing time.
Leaving the TL0 3.0 withtout pressing any button the display will change approx.10
seconds later to show the 1st track playback ready.
total number of tracks
❹ Press the PLAY/PAUSE
track number should be shown on the display, followed by the elapsed time for the
track being played.
Skip Track
Press the Skip forward
from the track being played (or displayed).
Note: Pressing the skip backward
beginning of the track being played. Press the backward
repeatedly to jump to the previous track.
Pause Playback
Press the PLAY/PAUSE
again to resume playback.
14
10 seconds later
total playing time
/ button to start playback. The playback ▷ indicator and
or backward
button during playback, playback will return to the
/ button to stop playback temporarily. Press this button
CD Stabilizer
Disc
レーベル面
CD Stabilizer Sensor
button to jump to the next or previous track
Disc Sensor
button twice