Blank Display; Awd Lock - Mercury 2006 Mountaineer Owner's Manual

Driver Controls

Blank display

Select this function from the INFO menu to turn the upper two lines of
the message center display OFF.
Setup menu
Press the SETUP control twice for
the following displays:
• AWD Lock (vehicles equipped
with AdvanceTrac with RSC
only)
• System Check
• Units (English/Metric)
• Language
• Autolamp
• Autolock
• Autounlock
• Running Boards (if equipped)
• Easy Entry/Exit Seat
• Park Aid (if equipped)
• Compass Zone
• Compass Calibration
• Oil Life Start Value
AWD lock (vehicles equipped with AdvanceTrac with RSC only)
Select this function from the SETUP MENU to display the AWD locked
function.
1. To disable/enable the AWD
feature, select this function from the
SETUP MENU.
2. Press the RESET control to select
the AUTO or LOCKED mode.
3. Press the RESET control for the
next SETUP MENU item or wait for
more than 4 seconds to return to
the INFO menu.
Note: When the AWD system is in the LOCKED mode, the 4X4 indicator
will be illuminated.
92
2006 Mountaineer (mnt)
Owners Guide (post-2002-fmt)
USA (fus)
INFO SETUP RESET