Replacing Side-Mounted Turn Signal Bulbs; Replacing Front/Rear Side Marker Bulbs; Replacing Tail/Brake/Turn/Backup Lamp Bulbs - Mercury 2006 Mountaineer Owner's Manual

Lights

Replacing side-mounted turn signal bulbs

1. Turn the headlamp switch to off.
2. Carefully pry the lamp assembly
away from the fender.
3. Rotate the bulb socket
counterclockwise to remove it from
the lamp assembly.
4. Pull the bulb straight out.
Reverse steps to reinstall bulb(s).

Replacing front/rear side marker bulbs

1. Turn the headlamp switch to off.
2. Reach under the bumper and
rotate the bulb socket
counterclockwise to remove it.
3. Pull the bulb straight out.
Reverse steps to reinstall bulb(s).

Replacing tail/brake/turn/backup lamp bulbs

1. Turn the headlamp switch to OFF
and open the liftgate.
2. Remove the two bolts from the
lamp assembly.
3. Remove the lamp assembly.
56
2006 Mountaineer (mnt)
Owners Guide (post-2002-fmt)
USA (fus)