Starting The Engine - Mercury 2006 Mountaineer Owner's Manual

Driving
• Make sure the parking brake is
set.
• Make sure the gearshift is in P
(Park).
• Turn the key to 3 (ON) without
turning the key to 4 (START).
Some warning lights will briefly illuminate. See Warning lights and
chimes in the Instrument Cluster chapter for more information
regarding the warning lights.

Starting the engine

1. Turn the key to 3 (ON) without
turning the key to 4 (START). If
there is difficulty in turning the key,
rotate the steering wheel until the
key turns freely. This condition may
occur when:
• the front wheels are turned
• a front wheel is against the curb
2. Turn the key to 4 (START), then
release the key as soon as the
engine starts. Excessive cranking could damage the starter.
218
2006 Mountaineer (mnt)
Owners Guide (post-2002-fmt)
USA (fus)