Home Time; Language Selection (Weekday Indicator And Date Display) - Junghans Mega 1000 Manual

8.3 Home time

T4 T1
Once the desired 12-24 hour time display mode has
been set, press T4 to adjust the home time setting.
T5
T3 T2
T4 T1
This setting enables you to set the home time. This
should correspond to the time zone where you
spend most of your time and can be adjusted using
T1 (set+) and T2 (set–).
T5
T3 T2
Press T4 to return to the normal time display mode.
60

9. Language selection (weekday indicator and date display)

The language of the weekday indicator of your Junghans Mega 1000 has been
set to German at the factory. The language can be set to English or French in
the time/date display modes (time display mode 2 or 3).
9.1 Language selection
> 3 sec.
T4 T1
To change the weekday indicator to another langua-
ge press T4 until the time/date mode is selected
(time display mode 2 or 3). The display shows the
T5
time and date. Press T4
for longer than 3 seconds to change the language.
T3 T2
T4 T1
The letter in the upper part of the display flashes
and shows the selected language (D for German, F
for French, E for English). This can be changed using
T5
T1 (set+) or T2 (set–).
T3 T2
61