Video Deck (Dubbing); Tv/Monitor (Playback/Dubbing) - Panasonic AG-HVX202AEN Operating Instructions Manual

Video deck (Dubbing)

When a component video cable is used for the connection, only the output signals from the unit
will be available.
CH1
AUDIO
CH2
VIDEO
Video cable (optional)
Connect to the output terminal on the
external device when the video signals and
audio signals of an external device are to be
input to the unit. (Tape mode only)
Connect to the input terminal on the external
device when the unit’' s video signals and
audio signals are to be output to an external
device.

TV/Monitor (playback/dubbing)

When a component video cable is used for the connection, only the output signals from the unit
will be available.
CH1
AUDIO
CH2
VIDEO
Video cable
(optional)
•• When the COMPONENT OUT connectors and the S-VIDEO OUT or VIDEO OUT connector have been
connected concurrently, the COMPONENT OUT connectors take priority. Signals cannot be output
through both sets of connectors at the same time.
•• When connecting the camera to another device using the component video cable, if the terminal on the
device to which it is to be connected is a BNC type, use the pin-BNC conversion plug provided.
Audio cable (optional)
White: CH1 (left channel) sound
Red: CH2 (right channel) sound
S-video cable
(optional)
S-VIDEO
IN/OUT
IN/
OUT
COMPONENT
IN/
OUT OUT
Component video
cable (included)
Audio cable (optional)
White: CH1 (left channel) sound
Red: CH2 (right channel) sound
S-video cable
S-VIDEO
(optional)
IN/OUT
IN/
OUT
COMPONENT
IN/
OUT OUT
Component video
cable (included)
•• Except when performing audio dubbing on
existing recordings, audio signals cannot be
recorded unless video signals are input to the
S-VIDEO IN/OUT connector and/or VIDEO
IN/OUT jack.
•• The signals of the S-VIDEO IN/OUT terminal
take priority over the signals of the VIDEO IN/
OUT terminal.
TV/Monitor
VCR
Connect one of these
cables to the terminal on
the video deck.
Connect one of these
cables to the terminal on
the television.
79