Call Back Using The Call Log Data; Request The Ll Position Of A Buddy - NorthStar NS100 Reference Manual

Call back using the call log data

DSC CALL 01 NS100
GROUP INDIVIDUAL
ALL SHIPS ROUTINE
>CALL LOG 10:45PM LOC
You can use the call log to quickly display
details about the 20 most recent incoming
calls, so that you can call any of them back.
You can also save an entry in your buddy list,
or delete an entry.
1. Press CALL to display the fi rst three options
2. Scroll through the options and move the

Request the LL position of a buddy

DSC CALL LL REQUEST
CALL LOG >ALEX
DISTRES LOG JEAN
>LL REQUEST BILL
You can use this option to contact a buddy
and ask for their position. For example, if your
buddy is in a good fi shing spot, your buddy
can send you the position in confi dence, rather
than revealing it over an voice channel.
1. Press CALL to display the fi rst three options
42
NS100
>CALL BACK
DELETE
SAVE
of the DSC CALL menu.
cursor to CALL LOG. Press >ENT. The details
of most recent incoming call is shown as the
fi rst entry (01) in the call log.
ALEX ALEX
LL REQUEST LL REQUEST
ENT>SEND? CALLING..
of the DSC CALL menu.
3. Use ^CH/SELv to scroll through the log
and locate a particular entry. Press >ENT to
continue.
4. Press >ENT again to confi rm the call back
OR
to delete or save the entry in your call log,
scroll to the desired option and then press
>ENT.
PORT OPS/VTS POSITION ACK
ALEX ALEX
LL REQUEST
WAITING ACK ESC->EXIT
2. Scroll through the options and move the
cursor to LL REQUEST. Press >ENT.
3. Press >ENT to select the fi rst buddy in your
buddy list, or scroll through the other entries
until the cursor is next to the buddy whose
position you want to check and then press
>ENT.
PORT OPS/VTS
N 39 27.021'
E135 12.011'
T 09:34 UTC
Northstar NS100