Handset Button Functions - NorthStar NS100 Reference Manual

Handset button functions

All possible buttons and their functions are
described. Some of the buttons may not work
or may not be available, depending on your
location and your NS100 radio model.
A single beep sounds whenever you press a
button. A double beep sounds to indicate an
invalid key or an error. (The beeps won't sound
3CH 16/9 CALL
if the volume is set to zero.)
SCAN WX FUNC
Button
Quickstart Guide
10 Quickstart Guide
Function
Channel selection. In normal
mode, press to step through the
channels one at a time or hold
down for rapid selection.
In menu mode, press to step
through the menu options.
Three favorite channels. Press
repeatedly to cycle through your
three favorite channels.
Priority channel. USA/Canada
only. Press to cancel the current
mode and tune into the priority
channel. Press again to return to
your original mode.
CH16 is the default. To make CH9
the default instead, hold down
16/9 until 09 is displayed on the
LCD screen.
Priority channel. Europe only.
Press to cancel the current mode
and tune into CH16. Press again
to return to your original mode.
Button Function
DSC call menu. Press to display
the DSC call menu and to make
different types of DSC calls.
Scan. Press to start a dual (DW)
or triple (TW) watch scan. Hold
down to start an all scan. Press
again to stop scanning.
Weather channel. USA/Canada
only. Press to hear the most
recently used weather channel.
Press again to return to your
previous mode.
Squelch adjustment. Press ^SQ to
increase or SQv to decrease the
squelch (threshold level). (Also see
Adjust the squelch.)
Volume. (Buttons located on
the right hand side of handset).
Press ^VOL to increase or VOLv
to decrease the speaker volume.
(Also see Adjust the volume.)
Press To Talk. (Button located on
left hand side of handset). Press
at any time to transmit on an
allowed channel. (Some channels
are restricted and do not allow
transmissions. Appendix C has
detailed information on channels.)
Northstar NS100