Enter Alphanumeric Data - NorthStar NS100 Reference Manual

Symbol
ATIS
GPS

Enter alphanumeric data

Use the handset buttons to enter channel
numbers or names, for radio functions, and for
menu editing. Each button has the functionality
shown in the table.
Press >ENT to move the cursor to the next
position when you enter a Buddy Name or a
Channel Name. Otherwise, the cursor moves
automatically to the next position when
entering data (similar to a cell phone). Also
press >ENT to confi rm any input or changes.
Press AESC to backup if you make a mistake,
or to cancel any changes and return to the
previous mode.
Quickstart Guide
Meaning
ATIS is enabled. (Europe only).
Otherwise blank.
indicates an incoming DSC call, or
blinks to notify you of any unread
call log messages.
low battery warning (activates at
10.8V DC).
Blinking indicates that the NMEA
GPS input is missing or invalid.
88 channel selected. V indicates an
EU special channel, e.g. M1.
X channel is temporarily deleted
from the ALL SCAN operation.
8 channel suffi x, if applicable to the
selected channel. Usually A or B.
Press: x1 x2 x3
button 1 1 - .
button 2 2 A B
button 3 3 D E
button 4 4 G H
button 5 5 J K
button 6 6 M N
button 7 7 P Q
button 8 8 T U
button 9 9 W X
button 0 0 Space (
Quickstart Guide
Quickstart Guide
x4 x5
' /
C ?
F !
I :
L #
O +
R S
V ;
Y Z
) %
9