Make A Routine Call To A Group - NorthStar NS100 Reference Manual

5. The call details are summarized on the

Make a routine call to a group

DSC CALL SELECT GROUP
INDIVIDUAL >FISHING
LAST CALL WATERSKIERS
>GROUP RACING
1. Press CALL to display the fi rst three options
2. Move the cursor to GROUP then press >ENT.
3. Select the group that you want to call and
4. The group name and MMSID are displayed.
40
LCD screen. Press >ENT to send the call.
The radio checks the status of CH70 and
if it is busy, waits for two seconds before
rechecking.
When CH70 is free, the call is sent and the
TX symbol appears on the LCD screen.
FISHING FISHING
055555555 055555555
ROUTINE ROUTINE
>SET CHANNEL ENT>SEND?
of the DSC CALL menu.
You can send a call to any one of the groups
that you have set up (see Reference Section 2
- Enter a new group MMSID.)
then press >ENT.
Select the working channel and press >ENT.
(You cannot usually call a duplex channel so
these are automatically eliminated. If the call
is to a Coast Station the radio will recognize
this and select the correct frequency.)
6. If the call is acknowledged, press PTT to talk
on the working channel.
If there is no reply, try making the call again.
(See Reference Section 3 - Retry a routine
call.)
FISHING
055555555
ROUTINE
CALLING...
5. The call details are summarized on the
LCD screen. Press >ENT to send the call.
The radio checks the status of CH70 and
if it is busy, waits for two seconds before
rechecking. When CH70 is free, the call is
sent and the TX symbol appears on the LCD
screen.
6. If the call is acknowledged, press PTT to talk
on your selected working channel. If there
is no reply, try making the call again. (See
Reference Section 3 - Retry a routine call.)
Northstar NS100