Select The Time Format; Show Or Hide The Time - NorthStar NS100 Reference Manual

Select the time format

BUDDY LIST GPS/DATA
LOCAL/DIST MANUAL
USA/INT/CAN >SETTING
>GPS/DATA
1. Move the cursor to GPS/DATA and press
2. Move the cursor to SETTING and press
3. Move the cursor to TIME FORMAT and press

Show or hide the time

BUDDY LIST GPS/DATA
LOCAL/DIST MANUAL
USA/INT/CAN >SETTING
>GPS/DATA
If you have entered the time manually (see
Reference Section 1 - Set your position and
time manually), the time is always shown on
the screen with the prefi x MAN.
However, if the time is being updated through
a GPS navigation receiver, you can show or
hide the time on the LCD screen.
1. Move the cursor to GPS/DATA and press
Reference Manual
SETTING TIME FORMAT
TIME OFFSET >12
>TIME FORMAT 24
TIME DISPLY 23:30
>ENT.
>ENT.
>ENT. There is a choice of a 12 hour time
format that uses AM and PM suffi xes, or a 24
hour time format.
TIME DISPLAY
SETTING
>ON
TIME OFFSET
OFF
TIME FORMAT
>TIME DISPLY
>ENT.
PORT OPS
N 35'.43.211'
E123'45.113'
LOC 11.30PM LOC
4. Press >ENT again to select the 12 hour time
format
OR
move the cursor to 24 and then press >ENT
to select the 24 hour time format.
The new time format is displayed immediately.
2. Move the cursor to SETTING and press >ENT.
3. Move the cursor to TIME DISPLY and press
>ENT again.
4. Press >ENT again to have the LCD screen
show the time
OR
move the cursor to OFF and then press <ENT
to hide the time.
25