Identifying Programmed Keys - Nortel M760 User Manual

Programmable keys
Modify
Start
End

Identifying programmed keys

Monday 16 October 09:26 AM
Comm Pick-up Funct. Lang.
Assistant Line 1
M.Martin Superv.
Line 2
Superv.
Travel A
Taxi
Bank Filter
Home Forward
Labels
50
- Press the Modify interactive key and resume programming
as explained above, in order to modify the programming
displayed.
- Press the Start interactive key to resume at the beginning,
in order to program another key.
- Press the End interactive key to exit programming mode.
Reminder: during programming,
- pressing the red key
- two keystrokes on the
the programming sequence.
There are two paper labels to enable you to mark the names
of correspondents or functions programmed on each group of
10 keys.
1 - Remove the transparent cover
the bottom of the label.
2 - Write the name of the programmed correspondent or func-
tion on the label.
3 - Refit the transparent cover
aborts the setting in progress;
red key terminates
over the label, by lifting
in position.