Chapter 4 Configuring the Passport 8250 for operations 41
where
configures the clocking scheme for the Passport 8250 device.
[set]
For details on the clockconfig parameters, see "Clockconfig command
parameters" (page 41).
Table 4
Clockconfig command parameters
Parameter
Values
External Primary
0 = network board (default)
Board Number
1 = service board in slot 1
2 = service board in slot 2
3 = service board in slot 3
External Primary
When External Primary Board
Port Number
Number is 1, 2, or 3, 1 to 16 for
the T1/E1 ports.
When External Primary Board
Number is 0, 3 for the ATM
uplink port (default).
External Secondary
The same as the External
Board Number
Primary Board Number.
External Secondary
The same as the External
Port Number
Primary Port Number.
(Sheet 1 of 2)
Definition
The board that
contains the
primary port.
The primary port.
The board that
contains the
secondary port.
The secondary
port.
Passport 8250 Installation Guide R2.2