Open Shortest Path First Configuration - Nortel ALTEON OS BMD00007 Command Reference Manual

/cfg/l3/ospf

Open Shortest Path First Configuration

[Open Shortest Path First Menu]
Table 6-69 OSPF Configuration Menu (/cfg/l3/ospf)
Command Syntax and Usage
aindex <area index (0-2)>
Displays the area index menu. This area index does not represent the actual OSPF area number.
See
range <range number (1-16)>
Displays summary routes menu for up to 16 IP addresses. See
if <interface number (1-128)>
Displays the OSPF interface configuration menu. See
virt <virtual link (1-3)>
Displays the Virtual Links menu used to configure OSPF for a Virtual Link. See
menu options.
md5key <key ID (1-255)>
Assigns a string to MD5 authentication key.
host <host entry number (1-128)>
Displays the menu for configuring OSPF for the host routes. Up to 128 host routes can be config-
ured. Host routes are used for advertising network device IP addresses to external networks to per-
form server load balancing within OSPF. It also makes Area Border Route (ABR) load sharing and
ABR failover possible. See
redist fixed|static|rip|ebgp|ibgp
Displays Route Distribution Menu. See
lsdb <LSDB limit (0-2000, 0 for no limit)>
Sets the link state database limit.
BMD00007, November 2007
aindex - OSPF Area (index) menu
range - OSPF Summary Range menu
if - OSPF Interface menu
virt - OSPF Virtual Links menu
md5key - OSPF MD5 Key Menu
host - OSPF Host Entry menu
redist - OSPF Route Redistribute menu
lsdb - Set the LSDB limit
default - Originate default route information
on - Globally turn OSPF ON
off - Globally turn OSPF OFF
cur - Display current OSPF configuration
page 273 to view menu options.
page 278
page 274
page 275 to view menu options.
to view menu options.
page 279 to view menu options.
Alteon OS Command Reference
to view menu options.
page 277 to view
The Configuration Menu 271