Memory Card
Removing the Memory Card
1.
Follow the procedures in
2.
Remove the
3.
Remove the
4.
Remove the
5.
Remove the
6.
Remove the
7.
Use your fingertips to spread apart the securing clips on each end of the
memory module connector until the memory module pops up.
8.
Remove the memory module from its connector on the system board by
drawing the module from the system board at a 45-degree angle.
Downloaded from LpManual.com Manuals
Before Working On Your Computer
ATG Handle (only for E6420 ATG systems).
ATG Port Cover (only for E6420 ATG systems).
battery .
Secure Digital (SD) card .
base cover .
12
35