Monitor Port Counters - Nortel 2300 Series Reference

38 Port Commands
Examples The following command clears port 5:
WSS# clear port type 5
This may disrupt currently authenticated users. Are you sure? (y/n) [n]y
success: change accepted.
See Also
• set port type ap on page 41
• set port type wired-auth on page 44

monitor port counters

Displays and continually updates port statistics.
Syntax
monitor port counters [octets | packets | receive-errors | transmit-errors | collisions |
receive-etherstats | transmit-etherstats]
octets
packets
receive-errors
transmit-errors
collisions
receive-etherstats
transmit-etherstats
Defaults All types of statistics are displayed for all ports. WSS Software refreshes the statistics every 5
seconds. This interval cannot be configured. Statistics types are displayed in the following order by default:
• Octets
• Packets
• Receive errors
• Transmit errors
• Collisions
• Receive Ethernet statistics
• Transmit Ethernet statistics
Access All.
Usage Each type of statistic is displayed separately. Press the Spacebar to cycle through the displays for
each type.
If you use an option to specify a statistic type, the display begins with that statistic type. You can use one statistic option
with the command.
Use the keys listed in Table 2
NN47250-100 (Version 02.51)
Displays octet statistics first.
Displays packet statistics first.
Displays errors in received packets first.
Displays errors in transmitted packets first.
Displays collision statistics first.
Displays Ethernet statistics for received packets first.
Displays Ethernet statistics for transmitted packets first.
to control the monitor display.