Nortel 2300 Series Reference page 596

596 Boot Prompt Commands
autoboot
Displays or changes the state of the autoboot option. The autoboot option controls whether a WSS automatically boots a
system image after initializing the hardware, following a system reset or power cycle.
Syntax
autoboot [ON | on | OFF | off]
ON
on
OFF
off
Defaults The autoboot option is enabled by default.
Access Boot prompt.
Examples The following command displays the current setting of the autoboot option:
boot> autoboot
The autoboot flag is on.
See Also
boot on page 587
NN47250-100 (Version 02.51)
Enables the autoboot option.
Same effect as ON.
Disables the autoboot option.
Same effect as OFF.