Nortel 2300 Series Reference page 583

Wlan security switch command line reference

Hide thumbs Also See for 2300 Series:

Table of Contents

describes the fields in this display.

Table 1: show snoop stats Output

Name of the snoop filter.

AP containing the radio to which the filter is mapped.

Radio to which the filter is mapped.

Number of packets received by the radio that match the filter.

Number of packets sent by the radio that match the filter.

Number of packets that matched the filter but that were not copied

to the observer due to memory or network problems.

Filter state:

• running—enabled

• stopped—disabled

• number-of-packets—If the filter is running and the

stop-after option was used to stop the filter, this

field displays the number of packets that still need

to match before the filter is stopped.

Nortel WLAN—Security Switch 2300 Series Command Line Reference

Snoop Commands 583