Nortel 2300 Series Reference page 419

next state
src MAC count
total src MAC count
curr_src_mac
next_src_mac
Table 61 describes the fields in this display.
Field
Port
VLAN
Spanning Tree enabled for vlan
port spanning tree
state
port_id
port_number
path cost
message age
designated_root
0
21807
21825
00-0b-0e-00-04-30
00-0b-0e-02-76-f6
Table 4: Output for show spantree statistics
Description
Port number.
VLAN ID.
State of the STP feature on the VLAN.
State of the STP feature on the port.
STP state of the port:
• Blocking—The port is not forwarding Layer 2
traffic but is listening to and forwarding STP
control traffic.
• Disabled—The port is not forwarding any
traffic, including STP control traffic. The port
might be administratively disabled or the link
might be disconnected.
• Forwarding—The port is forwarding Layer 2
traffic.
• Learning—The port is learning the locations of
other devices in the spanning tree before
changing state to forwarding.
• Listening—The port is comparing its own STP
information with information in STP control
packets received by the port to compute the
spanning tree and change state to blocking or
forwarding.
STP port ID.
STP port number.
Cost to use this port to reach the root bridge. This is part of
the total path cost (designated cost).
Age of the protocol information for a port and the value of the
maximum age parameter (shown in parenthesis) recorded by
the switch.
MAC address of the root bridge.
Nortel WLAN—Security Switch 2300 Series Command Line Reference
STP Commands 419