Show Version - Nortel 2300 Series Reference

564 File Management Commands
Access Enabled.
History
Version 4.0
Version 4.1
Version 5.0
Usage If you do not use one of the optional parameters, configuration commands that set nondefault values
are displayed for all configuration areas. If you specify an area, commands are displayed for that area only. If
you use the all option, the display also includes commands for configuration items that are set to their default
values.
Examples The following command shows configuration information for VLANs:
WSS# show config area vlan
# Configuration nvgen'd at 2004-5-21 19:36:48
# Image 3.0.0
# Model WSS
# Last change occurred at 2004-5-21 18:20:50
set vlan 1 port 1
See Also
• load config on page 543
• save config on page 548

show version

Displays software and hardware version information for a WSS and, optionally, for any attached AP.
Syntax
show version [details]
details
Defaults None
Access All.
Examples The following command displays version information for a WSS:
WSS# show version
WLAN Security Switch 2300 Series, Version: 5.0.0 QA 67
Copyright (c) 2002, 2003, 2004, 2005 Nortel. All rights reserved.
NN47250-100 (Version 02.51)
• New options added for remote traffic monitoring:
snoop
• rfdevice changed to rfdetect
New options added: l2acl, network-domain, and qos
Option portgroup renamed to port-group for consistency with
clear port-group, set port-group, and show port-group
commands.
Includes additional software build information and information about the
APs configured on the WSS.