Fiat Punto Owner's Handbook Manual page 32

Set clock (Set time)
This function enables to set the clock
through two sub-menus: "Time" and
"Mode".
Proceed as follows:
– briefly press button MENU ESC, the
display will show the two sub-menus
"Time" and "Mode";
– press button + or – to surf the two sub-
menus;
– select the required option and then
press button MENU ESCbriefly;
– if selecting "Time", briefly press button
MENU ESC, "hours" will flash on the
display;
– press button + or – for setting;
– briefly press button MENU ESC, "min-
utes" will flash on the display;
– press button + or – for setting;
– if selecting "Mode": briefly press button
MENU ESC , "24h" or "12h" mode will
flash on the display;
– press button + or – to select "24h" or
"12h".
After setting, briefly press button MENU
ESC to go back to the submenu screen
or press the button for long to go back to
the main menu screen without storing set-
tings.
– Press again button MENU ESC for long
to go back to the standard screen or to
the main menu according to the current
menu level displayed.
30
Set date (Set Date)
This function enables to update the date
(day - month - year).
To correct the date proceed as follows:
– briefly press button MENU ESC: "day"
will flash on the display;
– press button + or – for setting;
– briefly press button MENU ESC:
"month" will flash on the display;
– press button + or – for setting;
– briefly press button MENU ESC:
"year" will flash on the display;
– press button + or – for setting.
Note Every press on button + or – in-
creases/decreases by 1 unit. Keeping the
button pressed obtains automatic fast in-
crease or decrease. When you are near
the required setting complete adjustment
by single presses.
– briefly press button MENU ESC to go
back to the menu screen or press the but-
ton for long to go back to the standard
screen without storing settings.
First screen (information displayed
in the main screen)
(where provided)
This function enables to select the type of
information displayed in the main screen.
It is possible to display the date or the
pressure of the turbo-compressor.
To select one of the two items, proceed
as follows:
– push the button MENU ESC for a
short time, "First screen" is displayed;
– press again the button MENU ESC for
a short time to display the "Date" and
"Engine Info" options;
– press + or – to select the type of infor-
mation to be displayed in the main screen;
– press MENU ESC for a short time to
store the selection and return to the pre-
vious screen or press the button for a
longer time to return to the standard
screen without storing the selection.
Rotating the ignition key on MAR, the re-
configurable multifunctional display, after
the start-up check, displays the previous-
ly set information using the "First screen"
function of the menu.