Fiat Punto Owner's Handbook Manual page 138

Existing
hole
Existing
screw
Existing
screw
Existing
hole
fig. 3
136
Existing
hole
Existing hole
Assembly diagram fig. 3
The tow hook structure must be fastened
in the points shown by the symbol Ø us-
ing a total of 6 M10 screws.
The internal counterplates are to be at
least 6 mm thick.
The hook should be fastened to the body
avoiding any type of drilling and trimming
of the rear bumpers that remains visible
when the hook is removed.
IMPORTANT It is compulsory to fasten a
label (plainly visible) of suitable size and
material with the following wording:
MAX LOAD ON BALL 60 kg
WARNING
After fitting, screw holes
shall be sealed to prevent ex-
haust gas inlet.
F0M0143m