If An Interior Light Burns Out - Fiat Punto Owner's Handbook Manual

IF AN INTERIOR LIGHT
BURNS OUT
For the type of bulb and power rating, see
"When needing to change a bulb".
FRONT CEILING LIGHT
To replace the bulbs proceed as follows:
❒ work in the points shown by the ar-
rows and remove light A-fig. 30;
❒ open the protection lid B;
❒ replace bulbs C-fig. 31 releasing them
from the side contacts; make sure that
new bulbs are correctly clamped be-
tween contacts;
❒ re-close the lid B-fig. 31 and secure light
A-fig. 30 into its housing locking it
properly.
fig. 30
fig. 31
REAR CEILING LIGHT
(where provided)
To replace the bulbs proceed as follows:
❒ work in the points shown by the ar-
rows and remove light D-fig. 32;
❒ open the protection lid E-fig. 33;
F0M0213m fig. 32
F0M0234m fig. 33
❒ replace bulb F-fig. 33 releasing it from
the side contacts making sure that the
new bulb is correctly clamped between
the contacts;
❒ re-close the protection lid E-fig. 33
and secure light D-fig. 32 into its hous-
ing locking it properly.
F0M0214m
F0M0235m
173