Forwarding Calls; Transferring During A Call; Deflecting A Call During The Ringing Phase; Connections - Aastra 5361 Quick User Manual

Forwarding Calls

1. Press Foxmenu >
Menu
.
lect
2. Select the type of forwarding
3. Select the destination (user
4. Enter the call number and validate.
Reset call forwarding with Foxmenu >
>
Activated Features

Deflecting a Call During the Ringing Phase

1. Press Foxmenu >
Deflect
phase.
2. Enter the call number and press Foxmenu >
2
.
OK

Transferring During a Call

1. Press the Call key or Foxmenu >
enter the call number and wait until the called
party answers.
2. Press Foxmenu >
Connect
is transferred. If no-one answers, cancel with
2
/
End call Recover
Brokering
Switches between two callers without interrupt-
ing the calls. You are making/taking a call:
1. Press Foxmenu >
Enquiry call
number and wait until the call is answered.
2. Press Foxmenu >
Brokering
forth between the callers.
Conference Call
Connects several callers for a conference call. You
are making/taking a call:
1. Press Foxmenu >
Enquiry call
number and wait until the call is answered.
2. Press Foxmenu >
Conference
3. Add other callers using Foxmenu >
1
again.
call
Leaving a conference call: Press the End key.
Callback
The person is busy or does not answer: Foxmenu
> .
Callback
Resetting activated features
You can deactivate again all the call forwardings
and other temporarily active functions: Press
Foxmenu > >
Menu Activated Features
and / the function you want.
Reset Delete
Installation and Connection
You can set up the phone either at a 40° or a 25°
angle:
1. Insert the footstand as indicated on the instal-
, then
Forwarding
1
.
2
/subscriber
Menu
> /
Select Reset Delete
during the ringing
Enquiry call
2 3
/ ; the call
Transfer
3
and take back the first call.
, enter the call
to switch back and
, enter the call
.
Enquiry
>
lation diagram until it snaps into place.
2. Plug in the handset and phone cords and feed
>
Se-
them through the cable holders.
Notes
3
). • Some function commands of the vocal
announcements
then minal.
. • Always install the footstand before you plug in
the cables.
• Always remove the cables before you detach
the footstand.

Connections

,
Document Designation
• Document number: eud-1247 / 1.0
• Valid as of: Aastra 5000 R5.1 / Aastra 400 series
as of R1.0 / Aastra IntelliGate® series as of I7.7
• Copyright © 09.2010 Aastra Technologies Limited
Declaration of Conformity, User's Guide and oth-
er documents can be found at
www.aastra.com/docfinder
www.aastra.com
Select
3
are not to apply on this ter-
Connecting to the IP network
(Aastra 5361ip only)
Connecting the power supply
(Aastra 5361ip only)
Telephone connection cable
(Aastra 5361only)
Connecting the handset
2
or
3
.