Removing The Power Filler Panel - Nortel 8600 Installation Manual

Job aid: Bezel models
Figure 8
Bezel models 312096-A and 321325-A
Removing the power filler panel
A power filler panel maintains the proper cooling airflow in the Ethernet
Routing Switch 8600 chassis.
Remove the power filler panel from the power bay when you install a
power supply in a bay for the first time.
ATTENTION
To remove a power filler panel from the 8010co chassis with bezel model
312096-A installed, you must first remove the bottom front bezel (see
Bezel models" (page
bezel model 321325-A, you need not remove the bezel.
Copyright © 2008 Nortel Networks
.
39)). If you replaced bezel 312096-A with the modified
CAUTION
To maintain proper cooling, never operate the Ethernet Routing
Switch 8600 with an empty power supply bay. If you are
replacing a failed power supply and you do not have a power
filler panel, leave the failed power supply installed until a
replacement power supply is available.
Nortel Ethernet Routing Switch 8600
Installation — AC Power Supply
NN46205-306 02.01 Standard
30 May 2008

Removing the power filler panel 39

"Job aid: