Download Print this page

Front Panel; Technical Specification - Nortel UPS45 Instruction Manual

Nortel baystack ups45 power supply: reference guide

Advertisement

A terminal to which or from which a direct current or voltage may be
applied or supplied.
Un alternative à qui ou de qui un courant ou voltage continu peut être appliquer
ou peut être fourni.
INSTALL INSTRUCTION
- When replacing the batteries, use the same number and the following type of batteries:
12V/9Ah*3, CSB :HR1234WF2, BB: HR9-12
-
Use only safety (UL, TUV) approved power cord, and the rating must be higher than
10A/250Vac
-
Insert the UPS into the right side of BayStack 10 Power Supply Unit Only.

Front Panel

On : turn on UPS
-
-Off: turn off UPS
-BS: turn off Buzzer
-SYSTEM: System power of the device connected to power supply module 1,2,3 or 4 is
operating normally.
-RPSU: Power supply modules 1,2,3 or 4 are operating normally.
-FF: Fan fail
-BR: Replace battery
-BL: Low battery
-BO: mains is over voltage, UPS is in battery discharging mode
-BU: mains is under voltage, UPS is in battery discharging mode
-DOWN: UPS is off-line
-OT: over temperature
-AC: Utility power is abnormal
-N: Normal operation
-LOAD: Indicates load
-CHARGE: Indicates level of remaining charge in battery

Technical Specification

Input: 100Vac/120Vac, 12A, 60Hz
Output: 100Vac, 12A, 60Hz, 1200VA, 1000W, pf:0.83
120Vac, 12A, 60Hz, 1400VA, 1000W, pf:0.7
Operating Temperature: 0 to 40 degree C
2 1 2 1 9 4 - A

Advertisement

loading