Introduction - Nortel 8600 Installation Manual

.

Introduction

This guide provides information about the following AC power supplies
used in the Ethernet Routing Switch 8600 chassis:
•
•
•
•
This guide also provides instructions for adding an AC power supply in the
following Ethernet Routing Switch 8600 chassis models:
•
•
•
•
For instructions on replacing an AC power supply, see Routine
Maintenance, NN46205-312.
Prerequisites
•
Copyright © 2008 Nortel Networks
.
8003AC
8004AC
8005AC
8005DI AC
8003 chassis
8006 chassis
8010 chassis
8010co chassis
This product is intended for qualified service personnel who need to
add or replace an AC power supply in a 8000 Series chassis. Due
to high energy hazards greater than 240 VA, only qualified service
personnel are permitted to install and replace Ethernet Routing Switch
8600 components.
DANGER
Risk of injury by electric shock
Before working on this equipment, be aware of proper safety
practices and the hazards involved with electrical circuits. Use
only power cords that have a grounding path. Ensure the switch
is properly grounded before powering on the unit.
Nortel Ethernet Routing Switch 8600
Installation — AC Power Supply
NN46205-306 02.01 Standard
30 May 2008
21