Changing GSP device settings
Calibration of the touch screen
1. Touch
button to start the calibration process.
2. When a black cross appears on the screen press the
very centre of the cross, using your pointing pen.
Than the cross will move to another position, again
press the centre of it. Continue until the 'OK' message
appears. Than touch the screen to confirm the calibration
setting and return to the main menu.
3. In case the calibration process fails, it will be repeated
until successful.
System info
Touch
to enter SYSTEM mode.
In this mode you can read the data concerning the device.
Click
to return the Settings menu.
USB connection
Touch
to show next
Touch
to enter USB connection.
Choose an option:
"MASS STORAGE" or "MS ACTIVESYNC"
Click
to return the Settings menu.
SETTINGS
mode.
15