Accessing The Internet - Zte MF275R User Manual

3. Press the WPS button on your device to start Wi-Fi
Protected Setup authentication process.
4. Enable the WPS function on your client to respond this
authentication process.
5. Follow the system prompts on your client to finish the
connection.

Accessing the Internet

After the client is connected to your device successfully,
you can access the Internet in the Automatic or Manual
mode. The default mode is Automatic.
Mode
Automatic
Manual
Your device will connect to the Internet
automatically, and you can surf on the
Internet directly.
1. Log in the WebUI configuration page.
2. Select Settings > Network Settings >
Connection Mode > WAN Connection
Mode > Manual, and then click Apply.
3. Select Home, and then click Connect
or Disconnect.
Operations
21