Error Indicator; Cleaning And Care Of The Unit; Environmental Safety Notes - boso MEDISTAR S User Instructions

Error indicator

If a problem should arise during a measurement
which prevents a usable measurement from
being made, an error number is displayed in
place of the usual measurement result.
Error number key:
Err 1: Inflation pressure in-adequate after three
attempts to inflate.
Keep arm still.
Err 2: No pulses were detected that could be
evaluated.
Check the positioning of the cuff.
Err 3: Error during inflation.
Cuff is possibly not tight enough.
: Irregular puls or incorrect taking of blood
pressure (i.e. movement during measure-
ment)
Repeat measurement holding the arm
absolutely still. If the
played again, it can be that an irregular
heart beat is present. Consult your GP.

Cleaning and care of the unit

Please use only a soft, dry cloth to clean the unit.
Never use thinners, petroleum spirit or other
aggressive cleaning agents.

Environmental safety notes

Used batteries and defective electronic
devices do not belong into the household
waste.
symbol is dis-
They can be deposited at special centres. Please
contact your local authorities for information.
21