NetComm N300 User Manual page 42

To add a Trigger Port, simply click the Add button. the following will be displayed.
Option
Select an Application or
Custom Application
Trigger Port Start
Trigger Port End
Trigger Protocol
Open Port Start
Open Port End
Open Protocol
DMZ Host
Your Router will forward IP packets from the Wireless Area Network (WAN) that do not belong to any of the applications configured in the
Virtual Servers table to the DMZ host computer.
Enter the computer's IP address and click Apply to activate the DMZ host. Clear the IP address field and click Apply to deactivate the DMZ
host.
aDSL2+/3G wireless N300 4-Port modem Router
42
Description
User should select the application from the list. or
User can enter the name of their choice.
Enter the starting trigger port number (when you select custom application). When an
application is selected, the port ranges are automatically configured.
Enter the ending trigger port number (when you select custom application). When an
application is selected, the port ranges are automatically configured.
tCP, tCP/UDP or UDP.
Enter the starting open port number (when you select custom application). When an
application is selected, the port ranges are automatically configured.
Enter the ending open port number (when you select custom application). When an
application is selected, the port ranges are automatically configured.
tCP, tCP/UDP or UDP
ymL15wN
www.netcomm.com.au