Nortel Versalar 5399 Quick Start Manual page 28

Quick-Start Guide for Nortel Networks 5399 and 8000 Access Switches
Task
Install the Model 5399 or Model 8000:
- Model 5399
- Configure jumpers
- Install module in hub
- Verify installation
- Model 8000
- Install chassis
- Connect Ethernet cables
- Connect console terminal
- Verify installation
Initialize the Model 5399 and Model
8000 RAC:
- Manual initialization
- Set IP address (
- Set boot image (
- Set boot sequence (
-Auto initialization
-BOOTP
-RARP
Configure the RAC boot type:
- Boot using BFS
- Boot using TFTP
- Self-boot (default)
- Boot from a Windows NT host
- Boot from another RAC
Configure WANs:
- Set switch type
- Set WAN parameters
- Connect WAN interface
16
Tools and Documentation
Nortel Networks 5399 Access
Switch Hardware Installation Guide
Installing the Nortel Networks 8000
Access Switch
addr
)
image
)
seq
)
Tools
- Config Utility
- na utility
Managing Nortel Networks 5399
and 8000 Access Switches Using
Command Line Interfaces
Installing and Administering the
Config Utility
Config Utility online Help
300855-C Rev. 00