Page 2
Manager Research and Development standardien ja normatiivisten ohjeiden mukainen: EN 50 144, Directeur de recherce et développement EN 55 014, EN 61 000 direktiivien 98/37/EY, 89/336/EY määräysten mukaan. Festool GmbH Wertstr. 20 D-73240 Wendlingen EF-konformitetserklæring: Vi erklærer at have alene Dr. Johannes Steimel ansvaret for, at dette produkt er i overensstemmelse med de følgende normer eller normative dokumenter:...
Page 4
The electric tool must be connected to a Electronic control suitable dust extraction unit and applicable The ETS 150/3 EQ, ETS 150/5 EQ has safety regulations must be observed if dusts an electronic control with which the dangerous to health are likely to occur during rotational speed can be varied step- sanding.
Page 5
The best sanding results are achieved when onto the retaining strip (1.7) of the filter hol- applying moderate pressure. The ETS 150/3 EQ gives the best surface quality - Push the filter holder with its opening (1.11) and low abrasion.
Page 6
Complaints will only be acknowledged if the equipment has not been dismantled before being sent back to the suppliers or to an authorised Festool customer support workshop. Maintenance and care Store the operating instructions, safety notes,...
Need help?
Do you have a question about the ETS 150/3 EQ and is the answer not in the manual?
Questions and answers