Medisana EPD Manual page 32

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 21
GB
4 Miscellaneous
4.1
Cleaning and
maintenance
4.2
Accessories
Hair removal
system
26
• Remove the batteries before cleaning the unit.
• Never use aggressive cleaning agents such as thinning agents, petrol,
kerosene, alcohol or chemical products.
• Do not use stiff brushes. Use a soft, damp cloth to clean the device and cables.
• Do not allow any water to get into the unit. Do not use the unit again until
it is completely dry.
• Do not expose the device to direct sunlight or to high temperatures and
protect it from dust, dirt and damp. Protect the device from jolts, and do not
drop it.
• Store the adhesive electrode pads between applications on the protective film
in a storage pouch in a cool dry place.
• The self-adhesive electrode pads may not touch or lie above one another.
Before every application, make sure that the cables and electrode pads were
cleaned properly. If the cables are worn, they may no longer be used; replace
them with original parts. Use only self-adhesive electrode pads supplied by the
manufacturer.
• The effectiveness of the electrode pads gradually subsides after 20–30 appli-
cations due to skin deposits in the gel. To maintain the adhesiveness, hold the
electrode pads under cold running water for a few seconds and then shake
them dry. Before using the electrode pads again, leave them on the protec-
tive film for at least 8 hours.
• Remove the batteries from the unit if you do not plan on using it again
anytime in the near future. Otherwise, the batteries may start leaking.
• In case of a malfunction, do not try to repair the device yourself. Not only
does the warranty expire, but serious danger can result (fire, electric shock,
injuries). Only authorised service offices should carry out a repair.
• The device and accessories are kept in the bag provided.
Ask in your specialist shop or directly at our hotline:
2 self-adhesive electrode pads approx. 50 x 90 mm
4 self-adhesive electrode pads approx. 30 x 50 mm
2 self-adhesive electrode pads approx. 14 x 52 mm
1 connecting cable
Article No.: 87100 9
Article No.: 87080 4
Article No.: 87110 8
Article No.: 85510 8

Advertisement

Table of Contents
loading

Table of Contents