Panasonic DP-1810F Operating Instructions Manual page 53

Voice Mode Transmission
On-Hook Dialling
For On-Hook Dialling, follow the steps below.
Make sure that the FAX/EMAIL lamp is ON. If not, press
1a
Place original(s) face up on the ADF.
or
1b
Place a book or an original face down on the Platen Glass.
1
Press
2
2
You will hear dial tone through the monitor speaker.
3
Dial the telephone number from the keypad.
Ex:
5 5 5 1 2 3 4
4
When you hear a beep,
NOTE
1. If you need a special access number to get an outside line, dial it first then press
enter a pause (represented by a "-") before dialling the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling,
press
The dialling mode will be changed from Pulse to Tone after dialling the digit "/".
Ex: 9 PAUSE * 5551234
to select the original size.
ORIGINAL SIZE
(represented by a "/").
Sending Documents
to select the "FAX/EMAIL" mode.
ENTER STATION(S)
THEN PRESS START 00%
* MONITOR *
❚
* DIALLING *
5551234❚
ON LINE * XMT *
to
PAUSE
53