Download Print this page

Chapter 3: Operating The Kinetic Log Splitter - Generac Power Systems G10 Operator's Manual

Kinetic

Advertisement

Chapter 3: Operating The KINETIC LOG SPLITTER

It may be helpful to better familiarize yourself with the features of your Log Splitter
by reviewing Figure 1 in Chapter 2 before beginning the steps outlined in this
chapter.
Read and understand all instructions, safety precautions, and/or
warnings listed in "Chapter 1 General Safety Rules" before operating this
KINETIC LOG SPLITTER. If any doubt or question arises about the
correct or safe method of performing anything found in this manual,
please contact our Customer Service Representatives at our toll free
number: 1-888-545-6576.
When operating the Log Splitter, make sure you are standing in the safe
operating area (OPERATOR ZONE) as shown in Figure 4. You must stay
in the safe operating area at all times when the ram is in motion (whether
extending or retracting). Never place any part of your body into a position
that causes an unsafe operating condition.
Operator
Zone
Figure 4
CONTACT US AT 1-888-545-6576
9

Advertisement

loading