Place the monitor upright.
1
Slide one hand in the cutout area on the bottom cushion and use the other
hand to hold the stand.
2 Lift the monitor carefully to prevent it from slipping or falling.
3 Remove the protective cover from the monitor.
CAUTION: Do not press on the panel screen when lifting the monitor.
Connecting Your Monitor
WARNING: Before you begin any of the procedures in this section, follow the
Safety
Instructions.
To connect your monitor to the computer:
1
Turn off your computer.
2 Connect the VGA/HDMI/Audio cable from your monitor to the computer.
3
Switch on your monitor.
NOTE: Do not connect multiple display cables to the same computer.
Connecting the VGA cable (optional)
1
2
Audio In
Setting Up the Monitor
VGA
|
19