Telephone Controls - Nortel 1100 User Manual

Telephone controls

In some geographic regions, the IP Phone 1110 is offered with key caps that have English text
labels. Text in parentheses indicates labels appearing on the key caps, for example, (Services).
Fwd
(Line)
(Hold)
(Expand to PC)
(Goodbye)
Soft keys are located below the display area. The LCD label above each
key changes based on the active feature.
Use the Volume control buttons to adjust the volume of the ringer,
handset, headset, speaker, and the Handsfree feature. Press the top button
(Volume +)
to increase the volume, and press the bottom button to decrease volume.
(Volume -)
Use the Navigation keys to scroll through menus and lists that appear on
the LCD screen. The outer part of this key cluster rocks for up, down, left,
and right movements.The center button is an Enter key.
Use the Enter key, at the center of the Navigation key cluster, to confirm
menu selections.
In most menus, you can use the Enter key instead of the Select soft key.
Use the Line (DN) key (programmable memory button) to access the single
line and activate on-hook dialing. No status icon or LED is provided.
Press the Hold key to put an active call on hold. Tap the flashing line (DN)
soft key to return to the caller on hold.
Use the Expand to PC key to access external server applications where
supported.
Use the Goodbye key to terminate an active call.
When a message is waiting, the red Visual Alerter/Message Waiting
indicator flashes. Also, when the ringer sounds, this indicator flashes.
When your IP Phone 1110 firmware is being updated, the blue Feature
Status Lamp indicator flashes.
To find out if additional features are supported on your phone, contact your
administrator.
Chapter 2 Introduction
IP Phone 1110 User Guide
19