Packard Bell EasyNote TS User Manual page 88

Help: For more information about using Microsoft System Restore,
click Start, then click Help and Support. Type windows system
restore in the Search Help box, then press Enter.
To return to a restore point:
1. Click on Start
Center, then click on Recovery.
2. Click on Open System Restore, then Next.
3. Click on he restore point you want, click on Next, then Finish. A
confirmation message box appears.
4. Click on Yes. Your system is restored using the restore point you
specified. This process may take several minutes, and may restart
your computer.
Returning your system to its factory condition
If your computer experiences problems that are not recoverable by
other methods, you may need to reinstall everything to return your
system to its factory condition. You can reinstall using either your
hard drive or the recovery discs you have created.
Caution:
drive, then reinstalls Windows and all software and drivers that
were pre-installed on your system. If you can access important files
on your hard drive, back them up now.
• If you can still run Windows, see "
below.
Downloaded from LpManual.com Manuals
88
> Control Panel > System and Security > Action
This complete recovery deletes everything on your hard
Recovering from within Windows
"