Spare Parts; Table 1. Rebuild Kits And General Parts - Nortec Airfog Series Installation Manual

1. SPARE PARTS

A. Typically some spare parts are ordered with an AIRFOG system. These parts and kits
are to be retained in some safe location in a workshop for immediate access. It is
recommended that spare parts and repair kits be replaced as soon as they are
consumed.
B. Some NORTEC AIRFOG humidification system owners choose to not maintain in-house
spares or repair kits as there is sufficient redundancy built into the original design to
remain fully operational even if a few nozzles have to be shut down (disconnecting the
air pressure tube or removal and capping off the water and air delivery nozzle tubes).
The lead time to obtain replacement parts or repair kits is considered an acceptable risk.
Other owners decide that this risk is too high and choose to maintain spare parts and
repair kits in-house so that rapid repairs can be made.
Part #
1603115
1603117
1603118
1603119
1603120
1603122
1609503
1603116

Table 1. Rebuild Kits and General Parts

Description
Repair kit for Watts pilot water regulator (1603114 / 1603004)
Repair kit for Watts pilot water regulator (1609412 & 1603112)
Repair kit for Norgren panel mounted air regulator (1603001)
Repair kit for Norgren brass water pressure regulator (1603002)
Repair kit for AFE Nozzles (1609209, MINI, Octo)
Diaphragm repair kit for vacuum valve (1609000)
Filter for Air Pressure Control Section (1609401)
Repair Kit for 1603104 Regulator
10-70
Page 46
2008-04-11