Table of Contents
Advertisement
Disassembling the logic upper assembly
1.
Disconnect the touchpad button board to touchpad FFC.
2.
Tear off the mylar fastening the main board to touchpad button board FFC.
3.
Detach the front bezel from the main unit.
4.
Remove one screw as shown.
5.
Detach the keyboard support plate.
6.
Disconnect the speaker cable.
7.
Remove the two screws holding the speaker.
8.
Then place the speaker as shonw.
9.
Disconnect the speaker cable the remove the speaker.
58
Chapter 3
Advertisement
Table of Contents
