Table of Contents
Advertisement
Disassembling the Logic Upper Assembly
7.
Remove the two screws that fasten the left antenna, then remove another two screws on the other side
holding the right antenna line.
8.
Unscrew the six screws that secure the touchpad bracket then remove the touchpad bracket.
9.
Tear off the mylar that fasten the touchpad FFC then disconnect the FFC.
10. Disconnect the right and the left speaker cable.
11. Remove the two screws that secure the two speakers, one on each side.
12. Disconnect the audio board FFC.
13. Remove the screw that holds the audio-touchpad board then take the audio-touchpad board (with FFC)
off the lower case.
14. Disconnect the audio FFC from the audio-touchpad board.
15. Disconnect the phone jack FFC.
16. Disconnect the touchpad FFC off the audio-touchpad board.
64
Chapter 3
Advertisement
Table of Contents
